What Is a Cross Joint
Posted by

According to Ganjapreneur, a cross joint is a joint you can construct by combining small and large joints in the shape of a cross. The 2008 movie Pineapple Express made this unique joint form quite popular, sparking interest among cannabis enthusiasts everywhere. If you’re curious about this interesting joint shape and creating one of your own, consider this helpful article.

In this detailed cross joint guide, we’ll go over all the necessary supplies for rolling a cross joint and how to construct the perfect cross. We’ll also go over the pros and cons of making a cross joint. After reading, you can explore top-notch weed, as well as the supplies you’ll need to roll a cross joint, from Nexus Delivers in Sacramento, CA.

What You’ll Need To Roll a Cross Joint

Before embarking on your cross joint rolling adventure, you’ll need to gather several supplies, such as:

  • Large and small rolling papers
  • Your favorite weed strain
  • A rolling tray or flat surface
  • A roach or rolling tips
  • A lighter
  • A grinder

You’ll also need some type of small tool to add holes to your fat and small joints. You can use a needle, paperclip, thumbtack, or small screw, depending on your preferences. 

how to roll cross joint

How To Make a Cross Joint

Now that you’ve found all the necessary supplies, it’s time to learn how to roll a cross joint. Follow these simple steps, and you’re on your way to a unique cannabis smoking experience. 

1. Create Your Perfect Flower Mixes

Since you will roll two joints and combine them, you need to have a fair amount of cannabis at your disposal. Some cannabis fans like to use all of the same strain for both joints, while others prefer to mix two strains that pair well together. It’s all up to what you prefer for your experience.

Make sure your cannabis isn’t extremely dry so it’s easy to grind down into small pieces. You should also make sure that the weed is compact and won’t come out when you construct the cross joint. Using a high-quality grinder from a trusted retailer is the best way to get your cross joint off on the right foot. 

2. Roll a Large Joint

You should start by rolling a fat joint that you pack well with your preferred mix. You need to have an appropriate amount of thickness to hold the small joint inside and keep the cannabis in. Form the mouthpiece with the roach, then seal off the opposite end. 

The hole for the cross joint is ideally 3/4 of the way from the roach side. The joint will look like a cross if you construct it this way, and you’ll have the most fun smoking experience. You could also use a large pre-roll, but you have to know that you can find or craft a smaller joint to pass through it.

3. Roll a Small Joint

Next, roll a small joint that is thinner than your first one. This joint is smaller than the first, as it will need to fit inside it without breaking either piece. Since you’ll light both ends of the joint, you need to close off both ends and omit using a roach. 

Rolling trays or a rolling apparatus can make the building of your joints much easier. You can take some of the hard work off your plate with one of the latest and most trusted tools in the industry. Some people prefer hand creation, while others prefer a reliable finished product, but consider how adding one of these tools could make creating your cross-shaped joint quicker.

4. Add Holes to the Smaller Joint

You can either poke multiple tiny holes in your small joint or one in the middle, but the choice is entirely up to you. The hole (or holes) provide adequate airflow and allow the smoke to travel between the joints. You should not have holes in any other places besides where they’ll connect.

Some tools you can use to poke holes in your smaller joint include the following:

  • A needle
  • A toothpick
  • A 3mm screw

While you might have a pen or pencil handy, it’s best to utilize something else to make your hole to avoid contamination. Remember to always choose a clean tool.

5. Poke a Hole in the Larger Joint

After finishing the small joint, you can move on to the larger one. Determine where on the larger joint you wish to place the smaller one, then begin constructing the hole. Starting from the mouthpiece, many people stop and make the hole 3/4 of the way down on the joint.

You can use a paperclip or needle to pierce the joint, then expand the diameter until you’re satisfied. Additionally, you can use a 5 mm diameter screw to produce a clean and uniform hole in the joint. This is especially helpful if you already used a 3 mm diameter screw for the other joint.

6. Connect To Make a Cross

Slowly push the small joint through the hole in the larger one. It’s crucial to make sure the holes in the small joint connect with the ones in the fatter joint. This ensures that the air can travel properly between the two and you’re not wasting any cannabis in the process. 

7. Seal the Two Joints

Now that you’re proud of your joint construction, you’ll need to form an airtight seal between the cross pieces. This is perhaps the most important step in the process and could make or break your smoking experience. Glue strips from rolling papers can help create a strong seal and prevent any air loss from the connected holes. 

Wrap every side of the hole multiple times until you know the cross is secure. You can wet the glue strip to ensure no raising or gaps occur. Once you’ve patched everything up and checked that your cross joint is as perfect as you can make it, you’re ready to smoke. 

8. Light Up and Enjoy Smoking!

It’s time for the fun part you’ve been waiting for. Light up all three ends of your cross joint, and have a great time! You might need to have a friend help you light them all at the same time, and you could share your new creation with your companions. 

You could also light the thicker joint first, then the two smaller ends. However you do it, you’re sure to have a wonderful time. Cross joints are exciting party tricks and fun to show off as an impressive feat that your friends or acquaintances might want to try themselves.

Pros and Cons of Making a Cross Joint

Cross joints are slightly complex and time-consuming to make, and other ways of smoking are much quicker and easier. Therefore, you might wonder why someone would try to make a cross joint in the first place. Besides pure boredom and curiosity, people create cross joints as another fun thing to try or cross off their cannabis-related bucket lists.

Consider the following key advantages and disadvantages of making and lighting up a cross joint:

Perks of a Cross Joint

While cross joint smoking is not typically part of the normal smoke session, it could become a fun treat for you and your friends. If you’re on the fence, think about the positives. Some benefits to trying this out include:

  • It offers a quicker delivery of the smoke/cannabis.
  • It provides a new way to change up your smoking experience.
  • You can expand upon your cannabis rolling skills to include cross joints.
  • You could create cross joints as gifts or party favors for a fellow enthusiast.

If you have the time, patience, and resources, it can’t hurt to give cross joints a try. You can show off your new skill at the next party or smoke session and amaze your friends and guests. You could also recommend anyone who wants to make one to this helpful article!

Downsides of a Cross Joint

Before getting started, it’s good to learn about any potential disadvantages of cross joints, such as:

  • You could end up completing one of the steps incorrectly, having to start over or ending up with a less-than-perfect joint.
  • You might waste cannabis when attempting to make a cross joint.
  • The three burning points may use more cannabis than necessary for your high.

If you’d rather not take the risk, you can skip creating a cross joint at your next rolling session or leave it to one of your skilled friends. Creating a cross joint means you need to have some patience and the right materials, but with Nexus Delivers, you can easily get all of the weed and some of the tools you’ll need.

Enjoy High-Quality Weed From Nexus Delivers

Now that you’ve learned about one of the most unique rolling techniques, you’re well-prepared to create a cross joint. If you decide that’s too much effort, just order edibles or pre-rolls instead!  Nexus Delivers brings it right to your doorstep, no matter where you are in the Sacramento area – and you can even order from us online.